T 158

- Should only be used for spare parts requirements -

Highlights

• Parallel interface, 16 bit binary or Gray code
• Parallel interface, 20 bit BCD code
• LED display, 4 or 6 digit
• Display 14 mm in height
• Input channels PLC compatible
• 37-pole flat cable connection, DIN 41651
• Wide range power supply

Technical Data

Signal Inputs

All inputs are supplied with pull-down resistors (< 10 kOhm).

Strobe Signal

By control of the strobe input with a low signal the data present is brought to the display. This value is indicated until a new strobe pulse takes place.

BCD/Binary/Gray Switching

With control inputs the display can be switched for BCD, binary or Gray code input signals.

Inputs

• Data format: BCD code max. 20 bit, binary/Gray max. 16 bit
• Input level (adaptable, standard 24 V): min. low 0 V, max. low 3 V; min. high 18 V, max. high 30 V
• Input resistance: 10 kOhm to GND
• Strobe signal: low-active, min. 100 nsec

Power Supply

• 15-30 VDC (no galvanic isolation!)