FM 9000
Frequency multiplier with selectable multiplication factors (0…9.99/99.9/999) and start-up lockout.
Signal Converters
Digital signal converters and transducers for encoder, SSI and incremental encoder signals as well as frequency, speed and temperature monitoring – for DIN-rail mounting, with various supply voltages and galvanic isolation.
Frequency Converters
FT 9002
Frequency divider with division ratios from 1 to 255 as well as 2, 4, 8 or 16.
FT 9003
Frequency divider for input frequencies up to 2 MHz, division from 2 to 510 as well as 2, 4, 8 or 16.
FT 9004
Frequency divider for rotary pulse generators with adjustable division from 4 to 999.
FC 9001
Differential monitoring of two speeds with adjustable, integrated frequency divider and adjustable limit value.
FD 9000
Monitor for frequency, speed and standstill with 2 relay outputs and simple DIP-switch configuration.
DS 9001
Rotation direction sensor with enable input, relay and logic output for rotary pulse generators.
SSI Converters
SSI 9005
Digital signal converter for SSI encoders, up to 1 MHz clock frequency, analogue output and 2 limit-value contacts, optional RS485 interface.
SSI 9006
Digital signal converter for SSI encoders, up to 1 MHz clock frequency and 4 limit values, optional RS485 interface.
CNV 9101
Signal converter for SSI encoders with parallel output (max. 26 bit), short-circuit-proof and bus-capable, switchable master/slave operation.
Converters for Incremental Signals/Counters
CM 9001
Programmable signal converter for incremental encoder signals with analogue output 0(2)–10 V or 0(4)–20 mA, 2 limit values and data buffering on power failure.
CM 9002
Signal converter for incremental encoder signals with 4 limit values (relay), programmable mode and data buffering on power failure.
Converters for Analog Signals
AF 9001
Analogue-to-frequency converter: converts current or voltage signals into a frequency, with adjustable frequency divider and isolated output.
FA 9002
Processor-controlled frequency-to-analogue converter for incremental encoders with adjustable input voltages.
CO 9000
Thermostat for locomotives, monitoring 4 factory-programmed temperature values of one sensor.
CO 9001
Thermostat monitoring 4 temperature sensors with factory-programmable limit values.
LUW 1398/3-S02
Lamp current monitor for locomotives, monitoring 3 circuits via solid-state relays.
S 988
Isolation amplifier with galvanically isolated input and output (isolation voltage ±1 kV) for customer-specific signal conditioning.
Other
CNV 1413
Low-cost RS232-to-RS422/RS485 converter for transmission distances up to 1000 m and data rates up to 10 Mbit/s.