CNV 9101

Highlights

Input: Synchronous Serial Interface SSI
Output: parallel, max. 26 bit, max. 30 V, max. 100 mA, short circuit protected, usable for bus applications
Master/slave mode
Input code Gray/binary
Output code Gray/binary/BCD
Hold and OE inputs
Strobe output
Housing for DIN rail mounting EN 50 022
Connector: plug-in screw terminals and DB37M

SSI connection with high immunity against EMI instead of parallel EMI-prone connections
Replacement for parallel absolute encoders

Binary or gray code selectable
Resolution 10, 12, 13, 24, 25, 26 bit selectable (other resolutions up to 28 bit on enquiry)
Singleturn/multiturn
Direction of rotation selectable
Master/slave mode selectable (master: clock generation by CNV 9101; slave: clock generation by an external unit)
Clock frequency max. 125 kHz (slave mode) resp. max. 100 kHz (master mode)
Data input RS422/485
Clock output RS422/485
Clock input RS422/485

max. 26 bit (other number of channels up to max. 28 bit on enquiry)
outputs max. 30 V / 100 mA, short circuit protected
bus mode: controllable by OE input
strobe signal: indication of data transfer (pulse duration 10 ms, other on enquiry)
output code: binary, gray or BCD selectable (other on enquiry)
output and LED for error on SSI input (with bus mode)
output and LED for error on output channels (with bus mode)
operation without control signals possible for single device applications

Downloads